skip to Main Content

B360 XP-2 - CFA

Introduction

The Casagrande B360 XP-2 in CFA Configuration is a machine dedicated to give the specialist contractor an equipment to perform large diameter rotary piling. It is the result of research and innovation based on over 50 years of experience and success of the company in the fi eld of foundations and geotechnical engineering.

Thanks to the high torque of the rotary head up to 40 kNm, to the HD kelly bars and a powerful winch, the B360 XP-2 is able to drill quickly deep and large piles in hard soils. The crowd winch with a line pull of 600 kN and the stroke of the rotary head of 21 m will drive

The SPM (Smart Power Management) allows an intelligent engine power management to improve performances and productivity of machinery. The XP-2 technology monitors the istantaneus power fl ows and allocates the full available power to the job duties. The results is an increasing of the machine efficiency.

The design guidelines have taken particular care in the welfare of the operator and its high level of professional performance. In particular, best results were obtained in terms of ergonomics, both in the cabin and outside of the machine, and with regards to noise reduction.

More Details:

Technical Innovation

PERFORMANCE AND PRODUCTIVITY

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

FULL LOAD SENSING TECHNOLOGY

The XP-2 hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic
managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

SAFETY & TECHNOLOGY

The B360 XP-2 has a very low sound emission level as a result of the of sound-absorbing materials and oil heat exchangers, designed for reducing the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations. 

FLEXIBILITY

The XP-2 control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters. 

Technical Data

B360 XP-2 CFAEUUSA
Max depth C.F.A.34 m111 ft
Max diameter C.F.A.2700 mm47 in
Engine power400 kW536 HP
Width of crawler3000÷5000 mm8.2÷12.1 ft
Shoes width1000 mm39 in
MAIN WINCH
Line pull360 kN81,000 lbf
AUXILIARY WINCH
Line pull140 kN31,500 lbf
CROWD – RAM
Extraction force400 kN90,000 lbf
Crowd force250 kN56,200 lbf
Stroke7000 mm23 ft
CROWD – WINCH
Extraction force600 kN134,900 lbf
Crowd force600 kN134,900 lbf
Stroke21000 mm69 ft
ROTARY HEAD
Torque400 kNm295,300 lbf·ft
Drilling speed25 rpm25 rpm
WEIGHT
Weight in working condition125 t275.600 lbs

Standard Equipment

      • SPM control system – Smart Power Management
      • 12″ touch screen display for visualization and drilling parameter settings
      • Mast lifting and lowering aid
      • Drilling depth measurement and automatic mast verticality control
      • Automatic idling mode with engine start/stop for fuel saving
      • Smart lowering and overload protection for main winch
      • Rotary shaking system for tool discharge
      • Hook on auxiliary line
      • Protective roof guard (FOPS compliant)
      • Air condition system
      • Cab side catwalk
      • Electric refueling pump
      • Hydraulic self lifting counterweight

Optional Equipment

BASIC MACHINE

    • Railings on upperstructure
    • Water pre-heating system for starting engine at low temperatures
    • Automatic centralized greasing system
    • Cable remote control for tracking
    • Video unit with two cameras and one 7″ monitor to control winches and the rear of the machine
    • Automatic self alignement on drilling axis
    • Casagrande FleetMaster remote rig control and monitoring via internet
    • Transport kit according to required transport confi guration

CFA EQUIPMENT

    • HD mast support and reinforced mast elements for special arrangements
    • Measurement and visualization of extraction force.
    • Rotating CFA cleaner hydraulically operated
    • Star CFA cleaner
    • CFA lower guide with hydraulic opening
    • Crowd winches for CFA. Max crowd force 2 x 55
    • Hydraulic vibrator for cages
    • Instrument for measuring, displaying and recording of drilling parameters. The instrument is complete with software for processing the data on a PC
    • Instrument for continuous extraction of CFA

ROTARY PILING EQUIPMENT

    • Rotary head extension to increase the drilling diameter
    • Low headroom arrangement
    • H47 rotary head
    • Cardanic joint for rotary head
    • Main controlled winch 415 kN nominal line pull
    • Main free fall winch 250 kN nominal line pull
    • Auxiliary free fall winch 140 kN nominal line pull
    • Load cell on auxiliary winch for line pull monitoring
    • Pull control and overload protection for pull-down winch
    • Hydraulic mast folding for transport
    • Hydraulic jib folding for transport
    • Arrangement for casing oscillator
    • Casing oscillator GCL 2000. SE

Download

Product Catalogue

Download our presentation brochure to learn more about the equipment

COMPARE MODELS

Photo Gallery

Some images of our B360 XP-2 CFA in action

Request Information about B360 XP-2 CFA

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

[dynamictext* your-subject "CF7_get_post_var key='title'"]



 

Casagrande Products

A WIDE RANGE OF FOUNDATION MACHINES BUILT FOR TODAY’S WORKSITES NEEDS

Back To Top

We respect your privacy

On this website we use first or third-party tools that store small files (cookie) on your device. Cookies are normally used to allow the site to run properly (technical cookies), to generate navigation usage reports (statistics cookies) we do not use any kind of (profiling cookies). We can directly use technical cookies, but you have the right to choose whether or not to enable statistical and profiling cookies. Enabling these cookies, you help us to offer you a better experience.

Cookie policy