skip to Main Content

B175 XP

Introduction

The Casagrande B175XP is a machine dedicated to giving the specialist contractor equipment to perform large diameter rotary and CFA piling. It is the result of research and innovation based on over 50 years of experience and success of the company in the fi eld of foundations and geotechnical engineering

Due to the high torque of the rotary head, up to 175 kNm, and to a powerful winch, the B175XP is able to rapidly drill deep and large piles. The crowd winch with a line pull of 280 kN and the stroke of the rotary head of 13,5 m will drive casings deep into the ground with extreme accuracy.

The SPM (Smart Power Management) allows intelligent engine power management in order to improve the performance and productivity of machinery. The XP technology monitors the instantaneous power and hydraulic fl ows and allocates the full available power according to the requirements of the task. The result is an increase in the machine effi ciency.

“Keep the operator happy in a comfortable working environment” is our formula for added productivity. The B175XP is designed to satisfy the severe European Union standards on safety and is manufactured to comply with the ISO 9001 requirements on quality.

More Details:

Technical Innovation

PERFORMANCE AND PRODUCTIVITY

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

FULL LOAD SENSING TECHNOLOGY

The XP hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic
managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

SAFETY & TECHNOLOGY

The B175 XP has a very low sound emission level as a result of the of sound-absorbing materials and oil heat exchangers, designed for reducing the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations. 

FLEXIBILITY

The XP control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters. 

Technical Data

B175 XP Piling rig EU USA
Max depth 57 m 187 ft
Max diameter 1500 mm 59 in
Engine power 194 kW 260 HP
Width of crawler 2500÷3700 mm 8.2÷12.1 ft
Shoes width 600 mm 24 in
MAIN WINCH
Line pull 160 kN 36,000 lbf
AUXILIARY WINCH
Line pull 70 kN 15,800 lbf
CROWD – RAM
Extraction force 205 kN 46,000 lbf
Crowd force 140 kN 31,500 lbf
Stroke 5200 mm 17 ft
CROWD – WINCH
Extraction force 280 kN 63,000 lbf
Crowd force 280 kN 63,000 lbf
Stroke 13500 mm 44.3 ft
ROTARY HEAD
Torque 175 kNm 129,070 lbf·ft
Drilling speed 32 rpm 32 rpm
WEIGHT
Weight in working condition 42,5 t 93,700 lbs

Standard Equipment

      • SPM control system – Smart Power Management
      • 10,4″ touch screen display for visualization and drilling parameter settings
      • Mast lifting and lowering aid
      • Drilling depth measurement and automatic mast verticality control
      • Automatic idling mode with engine start/stop for fuel saving
      • Hook on auxiliary line
      • Protective roof guard (FOPS compliant)
      • Air condition system
      • Cab side catwalk
      • Electric refueling pump

Optional Equipment

BASIC MACHINE

    • Undercarriage with 800 mm wide track shoes
    • Cab front board
    • Lateral catwalks and handrails
    • Water pre-heating system for starting engine at low temperatures
    • Automatic centralized greasing system
    • Cable remote control for tracking
    • Video unit with two cameras and one 7″ monitor to control winches and the rear of the machine
    • Automatic self-alignment on drilling
    • Casagrande FleetMaster remote rig control and monitoring via internet

ROTARY PILING EQUIPMENT

    • Rotary head extension to increase the drilling diameter
    • Low headroom arrangement
    • Rotary shaking system for tool discharge
    • Cardanic joint for rotary head
    • Smart lowering and overload protection for main winch
    • Main free fall winch 135 kN nominal line pull
    • Auxiliary free fall winch 40 kN nominal line pull
    • Pull control for pull-down winch
    • Arrangement for casing oscillator
    • Casing oscillator up to GLL 1300

CFA EQUIPMENT

    • HD mast support for special arrangements (CFA 25)
    • Mast support and undercarriage for CFA 360° arrangement
    • Rotating CFA cleaner hydraulically operated
    • Star CFA cleaner
    • CFA guide with hydraulic opening
    • Crowd winches for CFA. Max crowd force 2 x 23 = 46
    • Hydraulic vibrator for cages
    • Instrument for measuring, displaying and recording of drilling parameters. The instrument is complete with software for processing the data on a PC
    • Instrument for continuous extraction of CFA

Download

Product Catalogue

Download our presentation brochure to learn more about the equipment

COMPARE MODELS

Photo Gallery

Some images of our B175 XP in action

Request Information about B175 XP

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

[dynamictext* your-subject "CF7_get_post_var key='title'"]



 

Casagrande Products

A WIDE RANGE OF FOUNDATION MACHINES BUILT FOR TODAY’S WORKSITES NEEDS

Back To Top

We respect your privacy

On this website we use first or third-party tools that store small files (cookie) on your device. Cookies are normally used to allow the site to run properly (technical cookies), to generate navigation usage reports (statistics cookies) we do not use any kind of (profiling cookies). We can directly use technical cookies, but you have the right to choose whether or not to enable statistical and profiling cookies. Enabling these cookies, you help us to offer you a better experience.

Cookie policy