skip to Main Content

B200 XP-2

Introduction

The Casagrande B200 XP-2 is a machine dedicated to giving the specialist contractor equipment to perform large diameter rotary and CFA piling. It is the result of research and innovation based on over 50 years of experience and success of the company in the field of foundations and geotechnical engineering

The Casagrande B200 XP-2 is a multifunction machine designed to drill boreholes, to insert and extract casings, to power a casing oscillator, for piling by the continuous flight auger method and ready for conversion in diaphragm wall equipment.

Designed to work on the most difficult sites and has excellent technical characteristics: 240 kN high speed winch for fast work, the H22 rotary head has a maximum torque output of 210 kNm and speed up to 34 rpm, it is ideal for drilling large and small diameter boreholes and for driving long casings.

“Keep the operator happy in a comfortable working environment” is our formula for added productivity. The B200 XP-2 is designed to satisfy the European Union standards on safety and is manufactured to comply with the ISO 9001 requirements on quality.

More Details:

Technical Innovation

PERFORMANCE AND PRODUCTIVITY

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

FULL LOAD SENSING TECHNOLOGY

The XP-2 hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic
managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

SAFETY & TECHNOLOGY

The B200 XP-2 has a very low sound emission level as a result of the of sound-absorbing materials and oil heat exchangers, designed for reducing the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations. 

FLEXIBILITY

The XP-2 control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters. 

Technical Data

B200 XP-2 Piling RigEUUSA
Max depth68 m223 ft
Max diameter2300 mm91in
Engine power246 kW330 HP
Width of crawler2500÷3900 mm8.2÷12.8 ft
Shoes width700 mm28 in
MAIN WINCH
Line pull250 kN56,200 lbf
AUXILIARY WINCH
Line pull87 kN19,560 lbf
CROWD – RAM
Extraction force260 kN58,450 lbf
Crowd force180 kN40,500 lbf
Stroke6000 mm19.7 ft
CROWD – WINCH
Extraction force290 kN65,200 lbf
Crowd force290 kN65,200 lbf
Stroke14000 mm46 ft
ROTARY HEAD
Torque210 kNm154,900 lbf·ft
Drilling speed34 rpm34 rpm
WEIGHT
Weight in working condition65 t143,300 lbs

Standard Equipment

      • SPM control system – Smart Power Management
      • 12″ touch screen display for visualization and drilling parameter settings
      • Mast lifting and lowering aid
      • Drilling depth measurement and automatic mast verticality control
      • Automatic idling mode with engine start/stop for fuel saving
      • Rotary shaking system for tool discharge
      • Hook on auxiliary line
      • Protective roof guard (FOPS compliant)
      • Air condition system
      • Cab side catwalk
      • Electric refueling pump

Optional Equipment

BASIC MACHINE

    • Railings on upper structure
    • Cab front board
    • Lateral catwalks and handrails
    • Water pre-heating system for starting engine at low temperatures
    • Automatic centralized greasing system
    • Cable remote control for tracking
    • Video unit with two cameras and one 7″ monitor to control winches and the rear of the machine
    • Automatic self-alignment on drilling
    • Casagrande FleetMaster remote rig control and monitoring via internet
    • Transport kit according to required transport confi guration

ROTARY PILING EQUIPMENT

    • 1,7 m mast extension for extended mast version
    • Low headroom arrangement
    • Cardanic joint for rotary head
    • Auxiliary free fall winch 160 kN nominal line pull
    • Smart lowering and overload protection for main winch
    • Pull control for pull-down winch
    • Arrangement for casing oscillator
    • Casing oscillator up to GLL 1300

CFA EQUIPMENT

    • Measurement and visualization of extraction force
    • Mast support and undercarriage for CFA 360° arrangement
    • Rotating CFA cleaner hydraulically operated
    • Star CFA cleaner
    • CFA lower guide with hydraulic opening
    • Crowd winches for CFA. Max crowd force 2 x 43
    • Hydraulic vibrator for cages
    • CFA feed control
    • Instrument for measuring, displaying and recording of drilling parameters. The instrument is complete with software for processing the data on a PC
    • Instrument for continuous extraction of CFA

Download

Product Catalogue

Download our presentation brochure to learn more about the equipment

COMPARE MODELS

Photo Gallery

Some images of our B200 XP-2 in action

Request Information about B200 XP-2

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

    [dynamictext* your-subject]



     

    Casagrande Products

    A WIDE RANGE OF FOUNDATION MACHINES BUILT FOR TODAY’S WORKSITES NEEDS

    Back To Top